Mounting Of The Camera; Rear View; Adjustment Of The Dip-Switches - Abus TVCC20000 Bedienungsanleitung

6.4 Mounting of the camera

For the mounting of the camera, mount the provided socket at the upper or underside of the
camera. For this the plate is aligned with the already predefined screw openings and fastened with
the enclosed screws.
In case of installation inside an outdoor housing, the provided spacer will be installed between
camera and socket.
ATTENTION!
During the assembly the camera must be separated from the mains voltage.
CAUTION!
The camera should not be positioned with opened iris towards the sun. This can lead
to the destruction of the sensor.

7. Rear view

7.1 Adjustment of the DIP-switches

1
3
12VDC Version
(1) DIP-Switches
(2) Potentiometer
(3) Power Supply (12VDC or 110~240VAC)
(4) BNC-Video Output (VIDEO OUT)
(5) Status LED (active if power connected)
2
5
4
1
3
110~240VAC Version
21
2
5
4