BOMANN GS 165.1 GS 165.1 Bedienungsanleitung Seite 20

Reverse the Door Opening Reverse the Door Opening
Reverse the Door Opening Reverse the Door Opening
If required, the door opening can be moved from the right (supplied condition) to the left side.
WARNING: WARNIN G:
WARNIN WARNIN G: G:
When replacing the door stop, the appliance must be disconnected from the power supply. Always unplug the
appliance first.
NOTE: : : : NOTE
NOTE NOTE
• When installing, ask another person to assist.
You need:
screw wrench, Phillips screwdriver as well as a thin-blade screwdriver.
•
• Remove the screw covers at the appliance cover. Un-
screw the below screws and remove the appliance cover.
• Transfer the blind cap of the appliance cover at the oppo-
site side.
• Dismount the upper door hinge by loosening the screws.
Open the appliance door a little and take it carefully of the
lower door hinge.
• Remove the blind cap (B) of the appliance door. Insert the
blind cap (A) contained in the delivery scope.
NOTE: : : : NOTE
NOTE NOTE
Keep the blind cap (B) for a further possible door opening reverse.
• Tilt the appliance slightly backwards and block it in this
position. Unscrew the feet. Dismount the lower door hinge
by loosening the screws.
• Attach the lower door hinge at the respective opposite appliance side, after you have unscrewed the hinge
pin and used by the other hinge side. Turn in the feet accordingly.
• Replace the appliance upright again. Insert the appliance door on the lower hinge pin and fix the door to
the property position.
• Transfer the upper door hinge on the opposite appliance
side correspondingly. Put the hinge pin in the hole of the
appliance door and tight the screws of the hinge.
20