Koenic KDW 60121 A2 BI Gebrauchsanweisung Seite 32

English
Knocking noise in water
pipes
Dishes are not clean
Cloudiness on glassware
Black or grey marks on dishes • Aluminum utensils have
Detergent left in dispenser
cups
Dishes are not drying
Technical Data
Power consumption
Rated voltage / frequency
Water pressure (flow pressure)
• This is a Dishwasher.
• Erp-testing was done according to EN50242:2008+A11, Directive(EU)1016/2010,
Directive(EU)1059/2010.
• See website below for detailed technical information or ask your vendor for specification sheet.
www.koenic-online.com.
32
IM_KDW 60121 A2 BI_170711_V04_HR.indb 32
• Caused by on- site
installation or cross section
of the piping
• Dishes not loaded correctly
• Spray arms are blocked
• Not enough detergent
• Program was not powerful
enough
• Filter is dirty or not correctly
inserted
• Too much detergent
rubbed against dishes
• Detergent cups are blocked
• Improper loading
• Rinse-aid level is too low
• Dishes removed too soon
1760 - 2100 W
220 - 240 V ~ 50 Hz
0.4 - 10 bar (0.04 - 1 MPa)
• This has no influence in the
dishwasher function
• Re-arrange the dishes
• Add more detergent
• Choose another program
• Clean the filter and ensure it
is assembled correctly
• Use less detergent and
choose shortest cycle for
cleaning glasses
• Use a mild abrasive cleaner
• Re-arrange the dishes
• Increase the rinse-aid level
• Do not removed the dishes
immediately after washing.
11/7/17 8:47 am