Establishing A Bluetooth Connection - Medion LIFE P64633 Bedienungsanleitung

 Plug the connector into the headphone output socket on the audio device. Then
plug the connector at the other end of the cable into the AUX IN input on the
soundbase.
6.3.3. Connecting devices via LINE IN
You will need an audio cable with cinch plugs. A 2 x cinch -> 2 x cinch stereo audio
connection cable is included with your device.
 Set the audio device to a medium volume. Then switch it off.
 Plug the white cinch connector into the white LINE IN socket (marked L for
left) on the soundbase, and plug the red cinch connector into the red LINE IN
socket (marked R for right).
 Then plug the red and white cinch connectors at the other end of the cable into
the correspondingly coloured audio output sockets on the output device.
NOTICE
Pieces of equipment like stereo receivers or television sets usually have
one red and one white audio output socket. These are usually marked
OUT, AUDIO OUT, LINE OUT or similar.
6.3.4. Optical connections
You can connect digital amplifiers, for example, via the OPTICAL port. You will
need an optical digital cable (fibre-optic cable, supplied with the product).
 Set the audio device to a medium volume. Then switch it off.
 Remove the protective cap from the OPTICAL port. Plug the connector into the
OPTICAL socket on the soundbase.
 Plug the connector into the corresponding digital input socket on your digital
receiver.
NOTICE
If no sound signals are output and the OPTICAL status LED flashes
quickly, switch the audio output format on your output device to PCM
(Pulse Code Modulation) mode.
6.3.5. Connecting devices via coaxial
 You can connect your television or an audio device, for example, via the
COAXIAL port. You will need a cinch cable (not supplied with the product).
Connect the Coaxial Out port on your external device to the COAXIAL port on
your soundbase.
 If necessary, switch the sound output to PCM on the connected devices. Make
sure you comply with the operating instructions of the connected devices.

6.3.6. Establishing a Bluetooth connection

Bluetooth operation enables the wireless reception of audio signals from an
external Bluetooth-compatible audio output device. Ensure that the distance
between the two devices is not greater than 10 metres.
DE
FR
NL
DK
EN
95 of 102