Herunterladen Inhalt Inhalt Diese Seite drucken

Preparing The Appliance; Assembling The Handheld Vacuum Cleaner; Assembling The Charging Station; Assembling The Upright Vacuum Cleaner - Medion micromaxx MD 16431 Bedienungsanleitung

2 in 1 akku-staubsauger
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

6. Preparing the appliance

 Remove all packaging materials from the appliance and the accessories.

6.1. Assembling the handheld vacuum cleaner

 Insert the cyclone insert precisely into the dust
container so that the seal on the dust filter closes
off the dust container.
 Then insert the HEPA filter into the cyclone in-
sert so that the seal on the dust filter closes off the
dust container.
 Place the dust container onto the motor block by
firstly inserting it into the catch at the bottom of
the motor block and then folding it shut until the
release button clicks audibly into place.

6.2. Assembling the charging station

 Place the foot holder with the locking tabs in the recesses on the charging sta-
tion until it clicks correctly into place.
 Place the charging station onto an even floor near to a mains socket.

6.3. Assembling the upright vacuum cleaner

You will require a flat-headed screwdriver or a Phillips screwdriver.
 Place the vacuum cleaner foot onto the lower section of the upright vacuum
cleaner housing so that the two metal pins on the vacuum cleaner foot fit into
the holes on the upright vacuum cleaner hous-
ing. Push the two sections together until there is
a flush connection.
 If necessary, remove the screw on the bottom of
the handle with a flat-headed screwdriver or a
Phillips screwdriver.
 Slide the handle back onto the upright vacuum
cleaner housing. Then insert the screw into the
drilled hole and tighten it using a flat-headed
screwdriver or a Phillips screwdriver.
The handle and the upright vacuum cleaner are now
connected firmly together.
 Now place the handheld vacuum cleaner into the
upright vacuum cleaner housing by firstly insert-
ing the suction opening into the lower section
of the upright vacuum cleaner housing and then
pressing it backwards into the housing until it
clicks firmly into place.
DE
FR
NL
EN
71 of 80

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis