Party Light & Sound PARTY-MOOVY12 Bedienungsanleitung Seite 4

Description of the rear panel
1. Master volume control
2. Microphone volume control
3. Echo control for the microphone
4. Bass control
5. Treble control
6. Microphone input
7. Switches the LED on the woofer on /off
8. When the power adaptor is connected, the indicator lamp lights up in red as long as the battery will be
charging. It lights up in green, when the battery is fully charged.
9. AUX input via 3.5mm mini stereo jack
10. Input selector: Press this button to switch between the various inputs (AUX, USB, SD, Bluetooth)
11. REC button: Press this button to record the sound of the wired or wireless mic on the USB or SD.
12. REPEAT: Press to toggle between repeating the current track or repeating all tracks.
13. Press to go back to the previous track.
14. Play/pause
15. Press to go to the next track.
16. USB stick input
17. Mini SD card input
18. ON/OFF switch of the system
19. Power LED: Light up when the system is switched ON
20. AC input connector
CONNECTION OF A WIRED MICROPHONE (not included)
Connect the microphone to the MIC IN socket and switch it on.
Note: If you are playing music from any other input, connecting the microphone will not mute the sound
output.
USING THE WIRELESS MICROPHONE
Open the battery compartment and insert two AA batteries with the correct polarity.
Turn the switch on the mic to ON. If the power indicator lamp doesn't flash or doesn't light up, check if the
battery has been properly inserted.
Start singing into the microphone and adjust the volume to the desired level.
When the indicator lamp on the mic lights up, you have to replace the battery.
Don't use the microphone close to the speaker in order to avoid feedback.
KARAOKE Function
This feature is available with any input. Play a track through AUX/USB/SD/ Bluetooth, connect a
microphone and sing along.
Built-in REC function
1. Plug a microphone into the MIC IN input.
2. Insert a USB/SD card into the corresponding port. Press Input selector button and select USB/SD mode.
3. If the USB/SD card is plugged into the speaker for the first time, the system will automatically create a
folder named 'record' to save the recorded files.
4. When you are ready to record, press REC button to record the sound of the wireless or wired
microphone.
©Copyright LOTRONIC 2017 PARTY-MOOVY12 / PARTY-MOOVY15 4