Entry And Exit Delay Time - Medion P89400 Bedienungsanleitung

Copy, add and then edit (observe upper and lower case):
Send:
Answer:
NOTICE!
• If the system has been disarmed using an RFID tag, an SMS notifi cation is
sent to the fi rst SMS number. In order to receive this notifi cation, the RFID
tag needs to be renamed. It is possible to rename up to 4 RFID tags.
• The other tags will be allocated a number based on the order in which
they are registered to the base station. Further instructions for register-
ing an RFID tag to the control panel can be found on page 10.

Entry and exit delay time

Send:
Answer:
Copy, add and then edit (observe upper and lower case):
Send:
Answer:
NOTICE!
This function will only affect detectors that have been allocated to the Delay
Zone. You can find further information on setting up your sensors for the De-
lay Zone under "Entry/Exit Delay" on page 95.
• This function can be used if you do not want to carry a remote control or
RFID tag around with you.
Rename Tag:
1. Tom
2. Nurse
3. Nancy
4. David
OK
11
Entry Delay (0-300 s): 0
Exit delay (0-300 s): 0
Entry Delay
(0-300 s):10
Exit delay
(0-300 s):20
OK
DE
EN
FR
105 of 168