Connecting The Suction Hose; Switching On And Off; Speed Control Setting; Suction Power Pusher - Westfalia Laser 2000 ZW12-18WFT Bedienungsanleitung

Start-Up and Operation

Connecting the Suction Hose

Insert the suction hose into the telescope tube
and insert the floor nozzle or any other nozzle of
the included accessory into the telescope tube.
Adjust the telescope tube with the sliding switch
to the desired height.

Switching On and Off

To switch the unit on, press the ON/OFF Switch.

Speed Control Setting

With the speed control setting you can adjust the
speed according to your application.
+
If you press the blue button, the speed will be
–
increased. If you press the red button you will
reduce the speed setting. The vacuum cleaner
always starts with the lowest setting. You can press
+
the button up to 3 x in order to achieve max.
speed.

Suction Power Pusher

With the pusher on the handle you can adjust the
suction power. If you completely close the openings,
the suction power will increase. To reduce the
suction power, open both opening on the handle.
The suction power pusher allows you to reduce the
suction power on sensitive surfaces or to release
sucked in objects.
12