SOLIS X-CHANGE Mixer 8351 Bedienungsanleitung Seite 60

H O W T O R E M O V E T H E AT TA C H M E N T S
• At the end of the blending process you have to remove the attachment. This must
only be done with the provided spanner – never attempt to remove the attach-
ments by hand, you might be seriously injured.
• Ensure that the power plug is not plugged into the socket.
• Hold the spanner by the handle and place its prongs under the attachment, at
the attachment shaft. You will hear a faint „Click".
• Lever out the blade attachment using the spanner – the attachment will detach
from the blender stand.
• Carefully hold the attachment in one and the spanner in the other hand. Then,
turn the spanner to position „K" and lift the attachment off in an upwards mo-
tion.
• You can place the cleaned attachment and the spanner in the accessory box.
• Be careful when touching the blades with your hands – they are extremely sharp.
„Click"
60
Push
Turn
Pull
K