Bearing Change - Rotor Vitamat Inox Rvi Reparaturanleitung

2.1

Bearing change

2.1.1 Disassamble:
1.)
Tool 5.) W4-1210.250
Reparaturanleitung / Repair instructions
Rotor Vitamat Inox RVI
2.) 3.)
- Disassemble the motor by the 4 pan head screws (2).
- Disassemble the bearing asm. (3) by the 6 countersunk
screws (4).
- To disassemble the clutch, screw the driving dog (lathe
drive carrier) (1) W5-1210.250 on the clutch.
Assemble one screw (2) for stopping the rotation.
4.)
- After assembling a driving dog (lathe drive carrier),
disassemble the clutch with help of the tool (5)
W4-1210.250, turning in counter-clockwise direction.
- Remove the break disk and the necessary parallel key.
- Disassemble the primary shaft (from outside).
- Remove the old shaft seal ring.
- Then disassamble boths ball bearings.
5.)
REP-RVI-1210-1-DE-EN
9