Safety Warnings - Ayce RTB 26-43 Originalbetriebsanleitung

SAFETY WARNINGS

IMPORTANT
READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
The machine shall always be used in accordance with the manufacturer's
instructions laid down in the instruction handbook.
The manufacturer will not be liable in cases of inappropriate use or modifications of
the appliance. Also, follow the safety advice, the installation and operation manual
and also to the valid accident prevention regulations.
Appliances with incorrect or missing parts or without a security case are not to be
operated. The service centre provides you with information concerning replacement
parts.
Training
g) Read the instruction carefully. Be familiar with the controls and proper use of the
equipment.
h) Never allow children or people unfamiliar with these instructions to use the
machine.
National regulations can restrict the use of the machine.
i) Never work while people, especially children, or pets are nearby.
j) Keep in mind that the operator or user is responsible for accidents or hazards
occurring to other people or their property.
k) Major repair work shall be carried out only by specifically trained personnel.
l) All persons and animals must be kept at least 15 meters from the machine while it
is working
Preparation
a) WARNING-Petrol is highly flammable:
- store fuel in containers specifically designed for this purpose;
- refuel outdoors only and do not smoke while refueling;
- add fuel before starting the engine. Never remove the cap of fuel tank or add
petrol while the engine is running or when the engine is hot;
- if petrol is spilled, do not attempt to start the engine but move the machine
away from the area of spillage and avoid creating any source of ignition until
petrol vapors have dissipated;
replace all fuel tank and container caps securely.
-
b) The brush cutter is fitted with a four-stroke engine, lubricating oil is needed
before starting the machine.
c) Before using, always visually inspect to see that the tools are not worn or
damaged. Replace worn or damaged elements and bolts in sets to preserve
balance.
d) Do not smoke near the machine.
e) Do not wear loose clothing, jewelery, or similar items that could be caught in the
starter or other moving parts.
f) Never put any items into the ventilation openings. Non-observance may lead to
injury, or damage to the machine.
Operation
a) Do not operate the engine in a confined space where dangerous carbon monoxide
fumes can collect
b) Keep the machine free of oil, dirt and other impurities.
c) Please always place the appliance on even and stable surfaces.
d) Never operate the appliance inside buildings or in an environment without proper
ventilation. Pay attention to air flow and temperature.
e) Do not operate or store the appliance in wet or humid surroundings.
f) Ensure the sound absorber and air filter work properly. These parts serve as
flame protection in case of misfire.
g) To avoid possible burn injuries, do not touch the exhaust system or other parts
that become hot during operation. Pay attention to the warnings on the machine.
h) The engine must not be operated with excessive rotary speed. The operation of the
engine with excessive rotary speed raises the risk of injury. Parts which affect the
rotary speed must not be altered or replaced.
i) Regularly check for leakage or traces of abrasion in the fuel system, such as
porous pipes, loose or missing clamps and damage to the tank or tank cap. Before
use all defects must be repaired.
j) Work only in daylight or in good artificial light.
k) Never pick up or carry a machine while the engine is running
l) Stop the engine:
−
whenever you leave the machine
−
before refueling
m) Before checking or adjusting the machine, the ignition plug and the ignition wire
respectively must be removed to prevent accidental starting.
n) Do not use of the machine when the operator is tired, ill or under the influence of
alcohol or the drugs.
o) Comply with local regulations to use the brush cutter.
p) Contact your local government offices for information regarding minimum age
requirements for operating the equipment.
q) Wear safety goggles and ear protection. Other safety equipment for the hands,
legs and feet is recommended. Correct safety equipment reduces the risk of injury
caused by catapulted foreign bodies or in the event of accidental contact with the
brush cutter.
r) Ensure that you maintain a steady foothold. Only use the brush cutter on flat
surfaces where you have a firm footing.
s) While working, always wear substantial slip-resistant foot protection as well as
protective clothing and long trousers. Do not operate the equipment when
barefoot or wearing open sandals. Always keep proper footing and operate the
brush cutter only when standing on fixed, secure and level surface.
t) Always hold the brush cutter with two hands (right hand hold the right handle to
control the trigger and the left hand hold on handle bar). To put hands in wrong
positions increases the risk of injury and must therefore be avoided.
u) Always use the harness when operate the tool, and adjust the length of the
harness to ensure it is suitable for operation.
v) Always use the correct blade and spool recommended by the manufacturer.
w) Take care against injury to feet and hands from the cutting means.
x) Always ensure that the ventilation openings are kept clear of debris
y) Perform daily inspection fedora use and after dropping or other impacts to identify
any significant defects.
92 93
GB