Troubleshooting - Klarstein 10031929 Bedienungsanleitung

Power cut
Most power cuts could be resolved within a short time. To keep your beverage cool
during a power cut, try opening the door as less as possible.
Moving the appliance
• Cut off the power supply and unplug the appliance.
• Remove all beverages from the appliance.
• When moving the appliance, do not lean the appliance over 45°.

TROUBLESHOOTING

Problem Possible Cause and Suggested Solution
The appliance Please adjust the front foot, keep the appliance leveling.
makes lots of
Please keep the appliance a bit space from walls.
noise?
The appliance It is normal because of the refrigerant working inside.
does not start
Compressor runs If no cold is being produced, call the seller's after-sale service.
continuously?
The appliance Please adjust temperature setting.
does not cool
Keep the appliance away from sunlight or heat.
sufficiently?
Please do not open the door frequently if not necessary.
Door does not After long time use, the door seal might get stiff & distorted
seal tightly partially. Heat the door seal with hot-wind blower or hot towel.
The door seal get softened and close the door.
Unpleasant smells Der anfängliche Plastikgeruch ist normal und verschwindet nach
inside cabinet kurzer Zeit.
Reinigen Sie den Innenraum und belüften Sie ihn für einige
Stunden.
EN
21