Filter Installation - Klarstein 10032220 Hinweise

EN
20

FILTER INSTALLATION

1
Pull the front panel and
extract upward.
4
Put Filter 2 ( HEPA Filter)
back into the inner side
of the product. Please
ensure the tab side facing
you.
2
Turn the buckles and take
out both pieces of
filter.
5
Make sure the filters are
installed in position.
Turn the buckles to fix the
filters.
3
Remove all packaging
bags. Put Filter 1
(Activated Carbon Filters)
back into the inside of the
product.
6
To install the front panel,
put the bottom into the
host buckle and close the
front panel. The front panel
will be held with in-built
magnets.