Technical Specifications / Technische Daten - Spectron SPA250Z Bedienungsanleitung

TECHNICAL SPECIFICATIONS
Peak Power Output
At 4 Ohms load / 14.4V (THD<=1.0%)
All channels driven simultaneously
Rated Power Output (RMS)
At 4 Ohms load / 14.4V (THD<=0.3%)
All channels driven simultaneously
Rated Power Output (RMS)
At 2 Ohms load / 14.4V (THD<=0.3%)
All channels driven simultaneously
Rated Power Output (RMS)
At 4 Ohms load / 14.4V (THD<=0.3%)
All channels driven simultaneously
Damping Factor
All Channels stereo @ 4Ohms/100Hz
Signal-to-Noise Ratio
(A-weighted - all channels)
Frequency Response
(all channels, frequency filtering
controls deactivated, 0 dB / - 1 dB)
Channel Separation
(all channels)
Input Sensitivity
(all channels)
Integrated Active Filtering
X-Over Slope Rates
Cross-Over Frequency
Swichable High & Low Pass
Fuses
Dimensions (W x D x H) mm
SPA250Z SPA2100Z
58W x 2 130W x 2
48W x 2 110W x 2
72W x 2 159W x 2
120Wx1 300W x 1
bridged bridged
> 50 > 50
> 85 dB > 85 dB
20 Hz - 20 kHz 20 Hz – 20 kHz 20 Hz – 20 kHz
> 50 dB > 50 dB
200 mV – 5.0 V 200 mV – 5.0 V 200 mV – 5.0 V
12 dB / oct. 12 dB / oct.
65/85/125 Hz 65/85/125 Hz
1 x 20A ATC 2 x 20A ATC
251 x 155 x 55 251 x 259 x 55 251 x 228 x 55
18
SPA450Z
50W x 4
42W x 4
59W x 4
90Wx2
bridged
> 50
> 85 dB
> 50 dB
12 dB / oct.
65/85/125 Hz
1 x 30A ATC