Overview; Before Using The Appliance For The First Time; Tools; Operation - Bosch CleverMixx MFQ25 Serie Gebrauchsanleitung

Overview

X Fig. A
Base unit
1 Ejector button
2 On/Off switch (multi-level)
a 0 = Appliance switched off
b 1 = Lowest speed
c 4 = Highest speed
d M = Instantaneous switching
(highest speed)
3 "Spotlight" bowl illumination
4 Apertures for inserting the tools
a Large aperture (with 4 indentations)
b Small aperture
5 Power cord

Tools

6 Turbo stirring whisks (x2)
7 Kneading hooks (x2)
8 Universal cutter *
(separate instruction manual)
* depending on the model
With the universal cutter, you can use the
appliance at full power. If the universal
cutter is not included with the hand blender,
it can be ordered from customer service
(order no. 12011748).
Before using the appliance
for the first time
Before the new appliance can be used,
it must be fully unpacked, cleaned and
checked.
Caution!
Never operate a damaged appliance!
■ Remove the base unit and all
accessories from the packaging.
■ Remove the packaging material that is
present.
■ Check all parts for completeness.
X Fig. A
■ Inspect all parts for visible damage.
■ Thoroughly clean and dry all parts
before using for the first time. X "Care
and daily cleaning" see page 12
Tools
Notes:
■ The stirring whisks are not suitable for
processing heavy dough.
■ The maximum processing quantity is
500 g of flour and ingredients.
Turbo stirring whisks
Suitable for sauces, beaten egg whites,
mashed potatoes, crème fraîche,
mayonnaise, cream and light dough, e.g.
cake mixture.
Kneading hook
Suitable for stiff mixtures such as
shortcrust pastry, yeast dough and
potato dough as well as for mixing heavy
mincemeat dough, pasta or bread dough.

Operation

W Risk of injury!
Do not insert the mains plug until all
preparations for working with the appliance
are complete and the tools are firmly
connected to the base unit. Never reach
into the rotating tools. Only use tools of the
same type in pairs.
X Fig. B
1. Completely unwind the mains cable.
2. Slide the desired tools into the
respective suitable apertures until you
hear them lock into place.
3. Place the ingredients into a suitable
receptacle.
4. Insert mains plug.
5. Immerse the stirring whisks or kneading
hooks into the mixture. Hold the bowl
firmly with one hand.
6. Switch on at the required speed level:
Level 1: For working and mixing
ingredients in
Level 4: For kneading and beating
M: For temporary maximum output,
press to the left and hold.
7. Move the mixer to and fro in the bowl
while mixing.
Overview en
11