Westfalia WKSS-100 Bedienungsanleitung Seite 21

English
Depending on the size of the saw blade the
support arm and the position of the motor
must be adjusted.
The arm can be extended (2) and turned (1)
after loosening the mounting piece. The pin,
on which the arm is mounted, can as well be
moved on the base plate (3). This provides a
wide range of possible adjustments for every
possible size of circular saw blade (90 –
400mm Diameter). The motor can as well be
moved on the base plate (4), which is
especially helpful for large diameter blades.
With these adjustments you bring the saw blade into the right position to the
grinding disc. During grinding the grinding disc is moved back and forth with
the lever. During adjustment the lever must be swung up to move the disc into
the gap between the teeth.
16