Westfalia WKSS-100 Bedienungsanleitung Seite 17

English
If necessary, loosen the clamping screw on
the motor support and slide the neck of the
motor unit into the support. Tighten the
clamping screw.
Insert the spike of the support arm (1) into
the slot as shown and secure it with the
square nut. Mount the support arm on the
spike and secure it with the mounting piece
(2) and the corresponding washer.
Mount the support pin for the adjustment
stop (3) on the base plate (1) and fix the pin
on the support (2). Next, mount the
adjustment stop on the pin and lightly tighten
the wing nut.
After that slide the saw blade support into
the slot as shown and secure it with the
square nut from below.
12