Märklin 48159 Handbuch Seite 5

4. Attach body to fl oor, fi tting tongues on end walls into recesses, in fl oor (fi g. 3), with the sloping
supports on the fl oor fi rmly against the tongues on the body.
5. Clip the spring into place between the two couplings (fi g. 4).
6. Place the wheels and axles in their bearings.
Fig. 2a
Fig. 2b
Kupplung zusammengebaut
Coupling assembled
Crochet d'attelage monté
Enganche armado
Agganciamento montato
Kopplet hopmonterat
Sammenbygget kobling
Koppeling gemonteerd
5