Approaching End Positions Of Roller Shutter / Awning / Venetian Blind - weinor BiEasy 5M Original Bedienungsanleitung

Approaching end positions of roller shutter /
awning / Venetian blind
Requirement
The transmitter/transmitter channel is programmed. The end
positions of the drive have been set.
Approaching bottom end position (roller shutter/awning)
Press the DOWN button briefl y. The blind moves to the bottom end
position/the awning extends completely.
Approaching the lower end position (Venetian blind)
Press the DOWN button until the status display lights briefl y. The
blind approaches the lower end position.
Press the DOWN button only briefl y (Inching for JA, pulsed
operation for Combio Pulse) and the blind moves a short distance
and stops again.
Approaching top end position (roller shutter/awning)
Press the UP button briefl y. The blind approaches the upper end
position/the awning retracts.
Approaching the upper end position (Venetian blind)
Press the UP button until the status display lights briefl y. The blind
approaches the upper end position.
Press the UP button only briefl y (Inching for JA, pulsed operation
for Combio Pulse) and the blind moves a short distance and stops
again.
14 | EN © weinor GmbH & Co. KG
Explanation of functions
Intermediate positions of the blinds
Roller shutter Awning
Pos▼ Intermediate Intermediate
position position
Pos▲ Ventilation -- /fabric ten-
position sioning
Programming the intermediate position in the receiver
Requirement
The transmitter/transmitter channel is programmed. The end
positions of the drive have been set. The blind is in thetop end
position.
1. Move the blind to the required position using the DOWN button.
In doing so, keep the DOWN button pressed.
2. Also press the STOP button. The blind stops. The status display
lights briefl y.
The intermediate position is programmed.
Programming the ventilation/tilting position in the receiver
Requirement
The transmitter/transmitter channel is programmed. The end
positions of the drive have been set. The blind is at its lower end
position.
1. Use the UP button to move the blind in the UP direction until
the ventilation gaps open or the slats turn. Keep the UP button
pressed during the movement.
© weinor GmbH & Co. KG
Venetian Interior
blind shading
Intermediate Intermediate
position position 1
Tilting posi- Intermediate
tion position 2
EN | 15