Battery Replacement; Cleaning; Disposal; Troubleshooting - weinor BiEasy 5M Original Bedienungsanleitung

Battery replacement

Battery replacement
Note
Replace batteries only with batteries of the
identical type.
1. Unscrew the underside of the unit and open
the housing.
2. Remove the batteries.
3. Insert the new batteries in the correct
position.
4. Put the unit back together again.
Dispose of used batteries properly.

Cleaning

Clean the unit with a damp cloth. Do not use a detergent. This may
attack the plastic.

Disposal

After the end of its service life, dispose of the unit in accordance
with the relevant regulations.

Troubleshooting

Fault Cause
Drive does not run, 1. Batteries are low
status display does 2. Batteries are incor-
not light rectly installed
18 | EN © weinor GmbH & Co. KG
Remedy
1. Insert new batteries
2. Insert batteries
correctly

Repair

Fault Cause
Drive does not run, 1. The receiver is out-
status display lights side the transmit-
red or fl ashes orange ting range.
2. Receiver out of
order or faulty
3. Receiver not yet
programmed
Drive operates in the Directions are incor-
wrong direction rectly allocated
Required drive does Incorrect channel
not run selected
Repair
Please contact your dealer if you have any questions.
Please always provide the following information:
• Item number and name on the type plate
• Type of fault
• Unusual events occurring prior to fault
• Accompanying conditions
• Own suspicion
© weinor GmbH & Co. KG
Remedy
1. Reduce distance to
the receiver
2. Switch on or re-
place receiver
3. Program receiver
Delete transmitter and
reprogram
Select correct channel
EN | 19