Herunterladen Inhalt Inhalt Diese Seite drucken

Explanation Of Functions; Bidirectional Radio System; Initial Operation - weinor BiEasy 5M Original Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für BiEasy 5M:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Explanation of functions

Explanation of functions

Bidirectional radio system

A bidirectional radio system transmits radio signals to a radio
receiver and enables feedback from the radio receiver to the
transmitter. The radio signal can be sent directly to the target
receiver. If this is not possible then the radio signal is forwarded via
other bidirectional participants until the signal reaches the target
receiver. The target receiver carries out the command and sends a
confi rmation back to the transmitter.
Bidirectional radio operation is only possible if all participants are
bidirectional. Otherwise, the system is only unidirectional.

Initial operation

Press a button to switch on the hand-held transmitter and illuminate
the status display and operating mode display. The hand-held
transmitter is in automatic mode during initial operation.
Status display
A radio signal is displayed by the status display (LED ring around
the STOP button) lighting up. The various colours of the status
display mean:
8 | EN
© weinor GmbH & Co. KG
Explanation of functions
Status display
Meaning
Flashing orange
Channel (transmitter) not programmed in any
receiver
Rapidly fl ashing
Channel (transmitter) in bidirectional program-
orange
ming mode. Operation of receivers already
programmed not possible.
Every 3 seconds in group programming mode
(also without a button being pressed)
Orange then green
Channel (transmitter) is operating bidirection-
ally and receiver has received the signal
Orange then fl ashing
Channel (transmitter) is operating bidirection-
red
ally and one of the receivers has not received
the signal
Red then green
Channel (transmitter) is operating bidirection-
ally and receiver has received the signal,
batteries weak
Red then fl ashing red Channel (transmitter) is operating bidirection-
ally and one of the receivers has not received
the signal, batteries weak
Green with repetition,
Channel (transmitter) has been deleted
then red (unidirec-
tional)
Orange and green
Channel (transmitter) has been deleted
(or red) alternating,
then red (bidirec-
tional)
Flashing red
Batteries weak
The transmitting power or the radio range will be reduced by
the reduction in the performance of the battery. If the voltage
drops below 2 V, functions are no longer executed and nothing is
displayed.
© weinor GmbH & Co. KG
EN | 9

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis