Ilda Signal; Please Note - Laserworld RS 400 G Bedienungsanleitung

Manual / Bedienungsanleitung: RS 400 G
X and/or Y axis no
deflection
Laser dark or dim
No output
Laser does not switch to ILDA mode:
 The interface does not connect pins 4 and 17 (Interlock) of the IDLA signal. See interface manual
 The cable does not connect pins 4 and 17. Use a cable that connects pins 4 and 17.
 Use an adapter, that connects pins 4 and 17.

ILDA signal

Pin out of the standard ILDA signal:
1 Scanner X+
2 Scanner Y+
3 Intensity/Blanking+
4 Interlock A
5 Red+
6 Green+
7 Blue+
8 – 12 Not used
13 Shutter +5V, max. 20 mA

Please note

This device has left our premises in absolutely perfect condition. In order to maintain this condition
and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions
and warning notes written in this user manual.
Laserworld cannot be made liable for damages caused by incorrect installations and unskilled
operation!
For service contact your dealer, or Laserworld.
Data subject to change without notice. Errors and omissions expected.
Scanner defective
CPU defective
Control board defective
Power supply defective
Scanner driver board defective
Lenses / mirrors dirty
Laser diode defective
Control board defective
Configuration / wrong mode
Configuration / wrong mode
Control board defective
Power supply defective
Display board defective
Pins 4 and 17 of the ILDA signal
not connected
-10V..+10V
-10V..+10V
0V..+2.5V
0..2.5V
0..2.5V
0..2.5V
Page / Seite 8 von / of 16
Galvo
IC
Control PCB
+-24V
Scanner driver board
Clean with alcohol
Laser diode
Control board
Check configuration (see
paragraph control panel)
Check configuration (see
paragraph control panel)
Control PCB
+-24V
Display
See below
14 X-
15 Y-
16 Intensity/Blanking-
17 Interlock B
18 Red-
19 Green-
20 Blue-
23-24 Not used
25 GND Signal ground
15-01-2215-00
00-89C516RD-00
26-2A-LT12V2-00
16-03-0039-00
26-2A-6800A-00
Inquire
26-2A-LT12V2-00
26-2A-LT12V2-00
16-03-0039-00
26-2A-YX2012DI-00
+10V..-10V
+10V..-10V
0..-2.5V
0..-2.5V
0..2.5V
0..-2.5V
Revision / Stand: Apr-10