Manual / Bedienungsanleitung: CS-1000 RGB
ILDA signal
Pin out of the standard ILDA signal:
1 Scanner X+
2 Scanner Y+
3 Intensity/Blanking+
4 Interlock A
5 Red+
6 Green+
7 Blue+
8 – 12 Not used
13 Shutter +5V, max. 20 mA
Technical specifications
Power supply: AC 85V-250V
Ambient temperature: +10°C ... +35°C
Power consumption: 50 W
Operation modes: DMX 512, automatic, music mode, ILDA
Lasersources: aircooled DPSS laser (green), diode laser (red, blue)
Optical power (at the laser): max 1000mW; min 750mW
>50mW 532nm green, >250mW 655nm red, > 450mW 445nm blue
Beam: ca. 3mm/2mrad
Laser class: 4
Scanning system: Galvo system, 30.000 PPS at 4°
Scanangle: max 40°
Weight: 7 kg
Dimensions: 33 x 31 x 17 cm (W x D x H)
Loudness: <70db
Please note
This device has left our premises in absolutely perfect condition. In order to maintain this condition and to
ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning
notes written in this user manual. Laserworld cannot be made liable for damages caused by incorrect
installations and unskilled operation!
This manual is subject to changes without notification, errors and omissions expected. Contact your local dealer
for an update, or check our website www.laserworld.com
For service contact your dealer or Laserworld. Only use Laserworld spare parts.
-5V..+5V
-5V..+5V
0V..+2.5V
0..2.5V
0..2.5V
0..2.5V
14 X-
15 Y-
16 Intensity/Blanking-
17 Interlock B
18 Red-
19 Green-
20 Blue-
23-24 Not used
25 GND Signal ground
5 / 10
+5V..-5V
+5V..-5V
0..-2.5V
0..-2.5V
0..-2.5V
0..-2.5V
Version Aug-11