Over/Under Checkweighing (Ics466X Only) - Mettler Toledo ICS466 serie Kurzanleitung

4.10 Over/Under Checkweighing (ICS466x only)

Setting target values
0
0
Over/Under Checkweighing display
Leaving Over/Under Checkweighing
esc
C
12 Operation
9
9
Leave Over/Under Checkweighing, but keep the target values.
Leave Over/Under Checkweighing and clear target values.
For other tolerance types, refer to the User manual.
You can either weigh the target weight or enter it
numerically.
Weight within the tolerances
Weight above the tolerances
Weight below the tolerances
ICS4_6x-series