LaserLiner AC-Check Bedienungsanleitung Seite 11

Please be aware that even if a visual signal is not displayed,
voltage may still be present. Differences in the design of the
!
connection socket or the nature of the insulation (thickness
and type) can affect functionality. Voltage cannot be detected
behind panels and metal covers.
5
Battery lamp
To switch on the battery lamp, press and hold down button 4.
The light switches itself off automatically as soon as the button
is released.
Information on maintenance and care
Clean all components with a damp cloth and do not use cleaning
agents, scouring agents and solvents. Remove the battery(ies) before
storing for longer periods. Store the device in a clean and dry place.
Technical data
Indicator
Voltage range
Frequency
Overvoltage category
Power supply
Operating conditions
Storage conditions
Dimensions (W x H x D)
Weight (incl. batteries)
Subject to technical alterations. 11.17
EU directives and disposal
This device complies with all necessary standards
for the free movement of goods within the EU.
This product is an electric device and must be
collected separately for disposal according to
the European Directive on waste electrical and
electronic equipment.
Further safety and supplementary notices at:
http://laserliner.com/info?an=acchk
LED, acoustic signal
5 V/AC ... 1000 V/AC
50 ... 400 Hz
CAT III - 1000V (non-condensing)
Pollution degree 2
2 x 1.5V alkaline batteries (type AAA)
0°C ... 40°C , Max. humidity 80% rH,
no condensation, Max. working altitude
2000 m above sea level
-10°C ... 60°C, Max. humidity 80% rH
154 x 32 x 28 mm
50 g
AC-Check
11
EN