Maintenance - BFT AXXEDO Stand Alone Montageanleitung

GENERAL OUTLINE
Thank you for buying this product, our Company is sure that
you will be more than satisfied with the product's performan-
ce. The product is supplied with a "Warnings" leaflet and an
"Instruction booklet". These should both be read carefully as
they provide important information about safety, installation,
operation and maintenance. This product complies with the
recognised technical standards and safety regulations. We
declare that this product is in conformity with the following
European Directives: 99/5/CEE (and subsequent amendments).
GENERAL SAFETY
WARNING! An incorrect installation or improper use of the
product can cause damage to persons, animals or things.
• Scrap packing materials (plastic, cardboard, polystyrene
etc) according to the provisions set out by current stan-
dards. Keep nylon or polystyrene bags out of children's
reach.
• Keep the instructions together with the technical brochure
for future reference.
• This product was exclusively designed and manufactured
for the use specified in the present documentation. Any
other use not specified in this documentation could da-
mage the product and be dangerous.
• The Company declines all responsibility for any consequen-
ces resulting from improper use of the product, or use which
is different from that expected and specified in the present
documentation.
• Do not install the product in explosive atmosphere.
• Only use original parts for any maintenance or repair
operation.
• Instruct the product user about the control systems
provided and the manual opening operation in case of
emergency.
• Keep radio control or other control devices out of children's
reach, in order to avoid unintentional automation activa-
tion.
• The user must avoid any attempt to carry out work or repair
on the automation system, and always request the assistance
of qualified personnel.
• Anything w hich i s not expressly p rovided f or in t he present
instructions, is not allowed.
• If special precautions are required to avoid hazards during
device operations, installation, maintenance, transport or
storage, the necessary instructions must be provided.

MAINTENANCE

System maintenance is to be regularly carried out by
qualified personnel.
SCRAPPING
Materials must be disposed of in accordance with the
regulations in force. Do not throw away your discarded
equipment or used batteries with household waste. You
are responsible for taking all your waste electrical and
electronic equipment to a suitable recycling centre.
The descriptions and illustrations contained in the present
manual are not binding. The Company reserves the right
to make any alterations deemed appropriate for the
technical, manufacturing and commercial improvement
of the product, while leaving its essential features unchan-
ged, at any time and without undertaking to update the
present publication.
INSTALLER WARNINGS
THE DECLARATION OF CONFORMITY CAN BE VIEWED ON
THIS WEBSITE: WWW.BFT.IT IN THE PRODUCT SECTION.
Anything that is not explicitly provided for in the in-
stallation manual is not allowed. The operator's proper
operation can only be guaranteed if the information
given is complied with. The Firm shall not be answe-
rable for damage caused by failure to comply with the
instructions featured herein.
While we will not alter the product's essential features,
the Firm reserves the right, at any time, to make those
changes deemed opportune to improve the product
from a technical, design or commercial point of view,
and will not be required to update this publication
accordingly.
ENGLISH
CODE BADGE
43
AXXEDO Stand Alone -