Herunterladen Inhalt Inhalt Diese Seite drucken

Proper Use; Package Contents; Technical Data - indexa VT35 Set Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für VT35 Set:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
GB
1. Introduction
Read through these operating instructions completely and carefully. The
operating instructions are an integral part of the product and contain
important information about operation and handling. Always observe all the
safety instructions. If you have any questions or are unsure about using the
equipment, ask a specialist or obtain information online at
www.pentatech.de. Keep these instructions in a safe place and pass them on
to third parties if necessary.

2. Proper use

This video door intercom VT35 consists of an outdoor station VT35C and an
indoor station VT35M which are connected using a four-core connection
cable. The maximum cable length is 70 m.
The power supply is provided using the supplied mains adapter which is
connected to the indoor station.
A chime is heard at the indoor station when the doorbell button is pressed.
The camera installed in the outdoor station is activated automatically and
the camera image is displayed on the monitor of the indoor station.
The camera image is displayed in colour. The infrared illumination
integrated in the outdoor station is activated during darkness to illuminate
the face of the person standing in front of the camera. The camera image is
displayed in black and white. The image quality in bad light conditions will
be improved by additional lighting.
By touching a button on the indoor station a two-way conversation is
enabled.
The camera and microphone can be activated for observation by touching a
button on the indoor station.
An additional indoor station (not supplied) can be connected.
An electric 12 V DC door release (not supplied) can be connected to the indoor
station if desired. This can be activated at the indoor station by pressing a
button.
The outdoor station is suitable for surface or flush mounting, and must be
protected from direct rain.
The indoor station and the mains adapter are only approved for indoor use.
The system is only for private use and not for commercial use.
Any other use or modification of the equipment is not authorised and
presents significant risks of accident. No liability will be accepted for
consequential damages or for damages caused by improper use or incorrect
operation.
This equipment is not suitable for use by persons (including children) with
limited physical, sensory, or mental abilities or with lacking experience or
lacking knowledge unless they are supervised by a person responsible for
their safety or obtain instructions on how to use the equipment. Children
must be supervised to make sure they do not play with the equipment.

3. Package contents

Check the package contents are complete and that the equipment is
undamaged immediately after unpacking.
1x indoor station (incl. wall bracket)
1x outdoor station
1x surface mount housing
1x flush mount housing
1x mains adapter with approx. 1,8 m cable
6x mounting screws
6x wall plugs
2x machine screws
1x operating instructions

4. Technical data

Outdoor station VT35C
Operating voltage:
from the indoor station (12 V
Power consumption:
max. 300 mA
Camera image sensor:
1/4" CMOS colour
Camera image resolution: 648 x 488 pixels
Camera lens angle of view: approx. 100° horizontal, approx. 68° vertical
Illumination:
5 infrared LEDs (for illumination of the close
range during darkness)
Daylight sensor:
activates LEDs in darkness
Dimensions:
outdoor station without housing:
approx. 99 x 152 x 28 mm
flush mount housing
approx. 87 x 139 x 42 mm
approx. 110 x 156 x 31 mm
Operating temperature:
-10 °C to +45 °C
Protection class:
IP44
connection cable:
required:
4x 0,8 mm², max. 70 m to indoor station
normal mounting height:
150 cm (camera)
min. mounting height :
135 cm (camera)
Indoor station VT35M
Operating voltage:
15 V
Current consumption:
max. 1 A
chime:
max. 76 dB(A) ±3 dB(A) (at distance of 1 m)
Monitor
3,5" TFT LCD colour (visible diagonal 85 mm)
Monitor resolution:
320 x 240 pixels
Voltage for door release:
12 V
must meet these specifications)
Dimensions:
approx. 134 x 90 x 35 mm
Operating temperature:
±0 °C to +35 °C
Application:
indoor use only, IP20
"
DC)
"
DC
"
(
DC (max. 1 A) The door release
GB - 21

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Vt35cVt35m

Inhaltsverzeichnis