Scope Of Delivery; Technical Data - Storch DMS 15 Bedienungsanleitung

GB
Thank you
for purchasing a STORCH product. You have purchased a quality product.
If you would like to suggest an improvement, or experience a problem with your product, please do not hesitate to
contact us.
Please contact your field sales representative or, in urgent cases, contact us directly.
Yours sincerely,
STORCH Service Department
Tel.:
Fax:
Free service hotline:
Toll-free order hotline:
Toll-free order fax:
Table of contents
(1) Delivery specifications

(2) Technical data

(3) Technical description of the machine / mode of operation
(4) Safety instructions
(5) Setup, installation and initial operation
(6) Cleaning
(7) Frost-proofing
(8) Installation of the water flowmeter
(9) Failures and their potential causes
(10) Warranty conditions
(11) EC Declaration of Conformity

(1) Scope of delivery

Flow mixer, operating instructions
(2) Technical data
Mains voltage / frequency:
Fuse:
Motor data:
Mixing capacity:
depending on material processed
(3) Technical description of the machine
STORCH Flow Mixer DMS 15 is suitable for processing all pre-mixed and machine-compatible dry mortar. Mineral
WDVS adhesive mortar, mineral plasters, fine concrete as well as plaster and brickwork mortar, for example, can be
mixed. The flow mixer is loaded with sackware (dryware) exclusively.
Functions
The flow mixer comprises a storage tank which is separated by the mixing pipe. During the operation, the dry material
is transported into the mixing pipe by means of the transport / metering shaft. In the mixing pipe, the mortar is mixed
after water has been added.
+49 (0)2 02 . 49 20 - 112
+49 (0)2 02 . 49 20 - 244
0800 786 72 47
+49 800 7867244
+49 800 7867243
(only available in Germany)
230 V / 50 Hz
16 A slow-to-blow
Single-phase motor
1.300 Watt
230 V, 50 Hz
Up to 19 l/min.
Total length (mixing pipe fitted):
Width:
Filling height:
Overall weight:
Water connection:
Back pressure:
whenever the machine is running
34
40 + 41
1,500 mm
700 mm
880 mm
45 kg
3/4" water hose
with GEKA couplings
at least 3.5 bar and/or 2 bar
Page
34
34
34
25
36
36
36
38
39
39