Maintenance And Care; Battery Replacement - avl ditest VCI 1000 Benutzerhandbuch

Maintenance and care

5 Maintenance and care
5.1 Cleaning
Ensure that the contacts of the USB socket and of the OBD connector are not dirty and damaged.
Clean the housing, the USB socket, and the OBD connector with a mild cleaning agent, if required.
5.2

Battery replacement

Danger of explosion if the battery is replaced improperly!
Dispose of used batteries according to the instructions!
4. Loosen the two screws (13 / 14) and remove the cover (15).
Fig. 5-1
5. Remove the battery (16) and insert a new battery.
Please observe the polarity of the battery!
The positive pole (17) of the battery must point to the outside/upwards as shown!
Fig. 5-2
6. See Fig. 5-1:
Install the cover (15) and screw-in the two screws (13) and (14).
4
CAUTION
(13) (14)
(15)
(15)
(16)
(17)
AVL DiTEST VCI 1000
User Manual