Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

INSTALLATION

1. Open the battery compartment and insert one new
9V alkaline battery.
2. Hold the unit steady. Screw the collar onto the faucet/
tap until it is tight, then tighten the locking collar. Turn
on the faucet/tap. Do not use a wrench or pliers.
3. Turn the knob and set up the RUN TIME.
4. Turn the FREQUENCY knob on RESET position. After
the red light flash, set up the FREQUENCY TIME.
5. If you do not see the flash light check the battery
and make sure, they are installed correctly.
6. Record your set up date and time, FREQUENCY TIME
and RUN TIME in your notebook for future reference.
7. At any time, you can use the manual ON/OFF func-
tion. When you turn the knob to ON, valve will open
30 minutes. Then, turn it off automatically. Or you
can turn it to be OFF position manually.
Remember, when finished, the RUN TIME must be
turned back to step no. 3 as your original set up
time.
Art. 25029
Manual Water Timer

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis