HQ Power VDP2000SMT Bedienungsanleitung Seite 5

7.2 Using the Smoke Machine
1. Switch on the smoke machine and wait for it to warm up. The green LED will light when the smoke machine
is ready-for-use.
2. Use the remote controller to control the smoke output.
3. Always switch off the smoke machine after use.
7.3 DMX Mode
DMX Switches
DMX Switch Value
DMX Address
The DMX address is formed by adding up the value of the different switched on
DMX switches. In the example above, the DMX address is 1 + 2 + 16 = 19.
DMX Connection
 Multiple smoke machines can be linked through serial linking. Connect the 3-
pin XLR output of the smoke machine to the 3-pin XLR input of the next
smoke machine in the series using a high-quality, two-core, screened cable
(not included).
V. 01 – 06/03/2015
VDP2000SMT
remote control functions
1 interval and output time adjustment
2 interval and output time switch
3 smoke output adjustment
4 smoke output adjustment switch
5 100 % smoke output switch
off
on
1 2 3
switch
1
2
3
4
5
6
7
8
4 5 6 7 8
value
1
2
4
8
16
32
64
128
5 ©Velleman nv