Operation - auna PSS35 Bedienungsanleitung

OPERATION

Power source
This unit works with rechargeable lead-acid battery. Fully charge the unit
before using the product for the first time. Unplug the AC Power cord from
the AC socket to work on the battery pack after fully charged. Plugging the
AC Power cord while the battery pack is attached initiates the charging of
this battery, the charge LED indicator lights red during charging, when the
battery is fully charged the indicator will turn to green. When the unit is with
low battery, the LED indicator will flash in red.
Basic function
TURNING THE UNIT ON/OFF
Press the power ON/OFF button to switch the unit on/off.
NOTE: When the unit is not providing the main function for 15 minutes, the
unit will automatically switch into standby mode. To turn on the unit again,
press „FUNCTION/ button.
ESD hints : The product maybe reset or not reset to operation of control due
to electrostatic discharge, just switch off and reconnect again.
Setting the function mode
To change the function modes, press the FUNCTION button to choose
USB1/USB2/BT/AUX/RADIO function.
Adjusting the volume
1. Rotate the VOLUME knob on the unit to increase or decrease the music
volume.
2. Rotate the GUITAR VOL. knob on the unit to increase or decrease the
guitar volume.
3. Rotate the MIC VOL. knob on the unit to increase or decrease the
microphone volume.
EN
15