auna PSS35 Bedienungsanleitung Seite 19

BT operation
1. Press the FUNCTION button on unit to switch to BT function, the LCD will
display "bt" and the pair indicator will flash at high speed.
2. Turn on the BT function on the device, scan the unit "PSS 35" and
connect, then input the pass word "0000" (four zeroes) if required, the
pair indicator keep light up to indicate connection done, and the display
will show "bt". Press Play to start playback.
3. Rotate the VOLUME knob on the unit or adjust the volume on the
external device to increase or decrease the music volume to your desired
level.
4. Press and hold the PLAY/PAUSE/PAIR/SCAN button to disconnect BT.
Note: The BT works best within 10 meters
AUX-IN
1. Press the FUNCTION button on unit to select "AUX" mode.
2. Connect your audio device to the AUX IN jack found on the front of the
unit with an AUX IN cable.
3. Rotate the VOLUME knob on the unit or adjust the volume on the
external device to increase or decrease the music volume to your desired
level.
4. Control playback with your audio device.
Mic jack operation
Microphone input is available in all modes.
1. Connect your microphone to the 6.3mm MIC JACK found on the front of
the unit.
2. Rotate the MIC VOL. knob on the unit to increase or decrease the
microphone volume
Guitar jack operation
Guitar input is available in all modes
1. Connect your guitar to the 6.3mm Guitar JACK found on the front of the
unit.
2. Rotate the GUITAR VOL. knob on the unit to increase or decrease the
guitar volume..
EN
19