SEVERIN FR 2445 Gebrauchsanweisung Seite 11

Preparing the unit
1. Always place the unit on a dry, level, non-slip and
heat-resistant surface impervious to contact with the
rubber feet.
2. Prepare the food to be air-fried.
3. Insert the plug into the socket.
4. Put the food into the basket with the holder fitted.
Make sure you do not exceed the 'MAX' marking.
Using automatic programmes
Symbol Food
French fries (deep-frozen)
Bacon
Chicken parts (fresh)
Chicken parts (deep-frozen)
Chicken (whole, max. 1.5 kg)
Shrimps (fresh)
Shrimps (deep-frozen)
Meat
Small cakes in ovenproof
cake-tins
Vegetables, eg
zucchini
carrots
Fish
1. Proceed as described under Preparing the unit (1-6)
and tap the key.
Ü The first automatic programme shows on the
display.
2. Keep tapping the
programme is shown. Temperature and time alternate
in the display.
Tips
Turn once
Max. 1.5 kg
Turn repeatedly
Turn once
Turn once
Turn repeatedly
Turn once
Turn once
key until the desired automatic
5. Install the basket holder in the appliance. If it is fitted
correctly, a beep signal is heard and the display
flashes briefly. The red indicator lamp on the front
comes on. Without the holder fitted, the appliance
cannot be operated.
6. Turn the fryer on by pressing the
seconds. To switch off, press it again for 2 seconds.
If the appliance is not being used, it will switch off
automatically after a short time.
Temperature Time
200 °C 20 – 30 min
35 – 45 min
180 °C 16 min
180 °C 20 – 25 min
22 – 25 min, depending on thickness
60 min
180 °C 12 min
15 – 17 min
180 °C 10 – 16 min, depending on thickness
200 °C 13 – 17 min
160 °C
15 – 17 min
10 – 12 min
180 °C 18 min
Hint:
To adjust the temperature and time settings individually,
press the or
temperature.
The Memory function allows for permanently saving
changes to the automatic programme. This is done by
keeping the key pressed for approx. 2 seconds. 2
beep signals confirm that the setting has been saved.
3. Tap the key.
Ü The food is now being cooked. The display
changes between temperature and remaining
running time. Audible beeps indicate that the pre-set
processing time has elapsed.
key for 2
keys to set the time resp.
11