Safty Notes; Important Notes; Functions - Märklin BR 01 Bedienungsanleitung

Safety Notes
• This locomotive is to be used only with an operating
system designed for it (Märklin AC, Märklin Delta, Märklin
Digital or Märklin Systems).
• Use only switched mode power supply units and transfor-
mers that are designed for your local power system.
• This locomotive must never be supplied with power from
more than one transformer.
• Pay close attention to the safety notes in the instructions
for your operating system.
• The feeder track must be equipped to prevent inter-
ference with radio and television reception, when the
locomotive is to be run in conventional operation. The
74046 interference suppression set is to be used for this
purpose.
• Do not expose the model to direct sunlight, extreme
changes in temperature, or high humidity.
• WARNING! Sharp edges and points required for operation.

Important Notes

• The operating instructions and the packaging are a com-
ponent part of the product and must therefore be kept as
well as transferred along with the product to others.
• Please see your authorized Märklin dealer for repairs or
spare parts.
• Maintenance, servicing, and repairs may only be done by
adults.
• The warranty card included with this product specifies
the warranty conditions.
• www.maerklin.com/en/imprint.html
10

Functions

• Recognition of the mode of operation: automatic.
• Addresses that can be set:
(Control Unit 6021/Mobile Station 60651/652)
1 – 80
1 – 255 (Central Station 6021x/Mobile Station 60653)
• Address set at the factory: 01
• Mfx technology for the Mobile Station / Central Station.
Name set at the factory: 01 138 DB
• Adjustable Acceleration delay (ABV).
• Adjustable Braking delay (ABV).
• Adjustable maximum speed.
• Setting the locomotive parameters (address, accelera-
tion/braking delay, maximum speed):
with the Control Unit, Mobile Station, Central Station.
• Smoker generator built at the factory
• World of Operation Mode
• The coal pile changes with the supply of coal in the
operations mode.
• Only the train control functions and headlight changeover
feature are available in analog operation.
Note
We recommend filling up the coal supply completely for
operation without the virtual simulation (standard operation).
Otherwise, the working of the coal load is possible only with
limitations by using the function button.
Additional explanations about the World of Operation mode
can be found in the supplemental instructions (included).