Inhaltsverzeichnis
Werbung
Inserting the Tool
Please note! First, press the rotating direction switch (2) in the middle position
to avoid unintentional start-up and afterwards insert the desired tool.
The drill chuck collet is for use with standard screwdriver bits or screwdriver bit
holder.
Lamp
When starting work the built-in lamp (7) will automatically turn on. The lamps
will facilitate screwing jobs in dimly lit places.
Maintenance and Cleaning
Use only a moist cloth to clean the unit. Do not use aggressive chemicals
as benzene or thinner, which may dissolve plastic parts, or abrasives.
Keep the ventilation slots always clean and free from obstructions. Clean
ventilation slots with a soft paint brush.
In the case of malfunctions of the cordless screwdriver and the charger,
please have the units repaired by a professional or turn to our customer
service.
Maintenance and Cleaning
7
Werbung
Inhaltsverzeichnis
