Battery Charger "A2018 - CBE PC -540HY Bedienungsanleitung

ELECTRONIC BATTERY CHARGER
ALARM
FUSE
Read the instructions before use
Retro
1)
Fuse signal LED: it switches on when the fuse is damaged, only if a load is connected to the battery.
2)
Connector to the temperature sensor (OPTIONAL).
3)
Selector for temperature sensor.
NB: when the temperature sensor is not connected set to "O" otherwise the battery charger won't
work.
4)
Selector for battery type: "Pb lead-acid battery, "Gel lead-GEL battery.
5) Red LED to signal the recharge (14,4V), green LED to signal the maintenance phase (13,8V).
6)
Security on/off switch.
FUNCTIONS
The switching battery charger, series A200, is able to charge the gel battery (B2 leisure battery) or the
lead-acid battery (car battery) automatically.
The high frequency switching technology allows to get efficiency with reduced sizes and weights.
The charge occurs in three different phases:
- Max recharge: max current, electronically limited up to 14,4V (25°C).
- at 14,4V (25°C) constant for: 1h (Pb-Acid) or 6h 20' (Pb-Gel)
End charge:
- Maintenance: at 13,8V (25°C) constant up to a main insertion.
"A2018" BATTERY CHARGER
14,4V
C° Gel 6h
13,8V
U
I
O
I
Pb 1h IUoU characteristic
Install in a cool and ventilated place
1 2 3 4
"
Mod. A 2018 by
Input 180/250V 50/60 Hz
Output power 300VA
Max. charging current 18A
Charge temp. controlled
230 V
C° t 40/E
a
Made in Italy
5 6
"
40