LaserLiner AC-tiveMaster Bedienungsanleitung Seite 12

5 Determining the direction of the rotating eld
Clockwise rotating eld
If the R LED (8) lights up, it
means that what you think is
phase L1 really is phase L1 and
that what you think is phase
L2 really is phase L2.
!
When you crosscheck this by switching round the test
prods, the opposite symbol should light up instead.
6 Battery lamp
To switch on the battery lamp, press and hold down button
10. The light switches itself off automatically as soon as the
button is released.
7 Calibration
The voltage tester needs to be calibrated and tested on a regular
basis to ensure it produces accurate measurement results. We
recommend carrying out calibration once a year.
EU directives and disposal
This device complies with all necessary standards
for the free movement of goods within the EU.
This product is an electric device and must be
collected separately for disposal according to
the European Directive on waste electrical and
electronic equipment.
Further safety and supplementary notices at:
www.laserliner.com/info
12
GB
Anticlockwise rotating eld
If the L LED (7) lights up, it
means that what you think
is phase L1 is actually phase
L2 and that what you think is
phase L2 is actually phase L1.