MSI X58M serie Handbuch Seite 50

▍
MS-7593 Manboard
▶ tRAS
Ths settng determnes the tme RAS takes to read from and wrte to memory cell.
▶ Advance Memory Settng
Settng to [Auto] enables the advance memory tmng automatcally to be determned
by BIOS. Settng to [Manual] allows you to set advanced memory tmngs.
▶ Memory Rato
Ths tem allows you to set the memory multpler.
▶ Adjusted DRAM Frequency (MHz)
It shows the adjusted DDR Memory frequency. Read-only.
▶ Uncore Rato
Ths tem allows you to set the uncore (clock speed of the L3 cache and memory con-
troller) multpler.
▶ Adjusted Uncore Frequency (MHz)
It shows the adjusted uncore frequency (uncore rato x base clock, the clock speed of
the L3 cache and memory controller). Read-only.
▶ ClockGen Tuner
Press <Enter> to enter the sub-menu and the followng screen appears.
▶ CPU Ampltude Control/ PCI Express Ampltude Control
These tems are used to select the CPU/ PCI Express clock ampltude.
▶ CPU CLK Skew/ IOH CLK Skew
These tems are used to select the CPU/ IOH chpset clock skew. They can help
CPU to reach the hgher overclockng performace.
▶ Adjust PCI Frequency (MHz)
Ths field allows you to select the PCI frequency (n MHz).
▶ Adjust PCI-E Frequency (MHz)
Ths field allows you to select the PCIE frequency (n MHz).
▶ Auto Dsable DRAM/PCI Frequency
When set to [Enabled], the system wll remove (turn off) clocks from empty DIMM and
PCI slots to mnmze the electromagnetc nterference (EMI).
▶ CPU Load Lne Calbraton
When set to [Enabled], system wll automatcally fix the vcore droop ssue of CPU, and
the CPU can receve stable voltage n overclockng.
En-40