Before Using For The First Time; Using The Device - Ideen Welt P8-RM-CGG Bedienungsanleitung

BEFORE USING FOR THE FIRST TIME

Remove all packaging materials and check the device and its accessories for any damage. Do not use
this device if you notice that it is damaged in any way. Please contact Rossmann Customer Services
immediately.
RISK OF SUFFOCATION! Keep all packaging materials
out of the reach of babies, toddlers and children. Make
sure that all packaging materials are disposed of in a
responsible manner. You can find out further
information about collection points and recycling from
your local authority.

USING THE DEVICE

Please read through the operating instructions fully
before using for the first time!
DANGER OF SUFFOCATION AND CHOKING!
This device is not a toy. Children must not be allowed to
play with small parts.
RISK OF BURNING! The device gets very hot particular-
ly at the nozzle
RISK OF BURNING! Do not touch the melted hot glue or
hot workpieces. Allow the melted hot glue to cool down
for at least 5 minutes.
Note:
▪
Test each application on surplus material before using the device and thus check the desired effect.
This will help you avoid damaging the workpiece.
▪
If necessary, secure the workpiece against unintentional slipping.
▪
The areas to be glued must be clean, dry and free of grease.
▪ Do not use any flammable solvents to clean the areas to be glued.
▪ The ambient temperature and the materials being glued must not be colder than +5°C and not hotter
than +50°C. Those materials (e.g. steel) that cool down quickly should be warmed up a little to
achieve a better bond.
▪ Roughen smooth surfaces before gluing them.
Mounting the stand
Before using the device for the first time, mount the wire stand
into the stand supports
Heating the device
Without base station
1. Tightly hold the device and place the Euro 8 socket
on the device.
2. Fold the wire stand
stable surface.
①
②
on both sides of the device.
⑨
:
⑥
into the forward position and place the device upside down on a level and
. Only touch the device on the handle!
⑦
on the mains cable onto the Euro 8 plug
G
⑥
by lightly pushing it apart and fitting it
⑧