Changing Brushes; Maintenance - jbc CLMB-A Senior Tip Cleaner Anleitung

Changing Brushes

1. Unplug from the mains and press the
button to open the splashguard.
3. Remove the tin collection tray. Once clean, replace it followed by the brushes.
Optional Brushes
Metal Brushes (Blue core) Thermostable Brushes
Ref. CLMB-A7 (Black core)
Ref. CLMB-P1
4 4
2. Pull the white piece upwards to remove
the brushes.
Thermostable Brushes
(Blue core)
Ref. CLMB-P7
Vertical Access
The Senior Tip Cleaner has a second position
which facilitates working with robots.

Maintenance

Before carrying out maintenance or storage,
always unplug the equipment from the mains.
- Use a damp cloth to clean the splashguard
and the inside.
- Check periodically that the sensors are
clean. Use a cotton bud with alcohol
to clean them.
- Maintain the brushes clean and the tin
collection tray.
- Replace any defective or damaged piece.
Use original JBC spare parts only.
- Repairs should be performed only by a JBC
authorized technical service.
w w w.jbctools.com
Sensors
5 5