LG Tone Pro HBS-750 Benutzerhandbuch Seite 8

How to Use
Auto Reconnect
- If the HBS-750 is turned off (either accidentally or intentionally) while connected
to a handset, the headset and handset will disconnect. The headset and handset
will automatically reconnect when the HBS-750 is turned back on while in range.
- Secondary handset need to be connected via selecting "LG HBS750" from the
list of devices at Bluetooth menu.
Out of range
- If the paired devices are separated by a range of 10 meters(33 feet) or more, the
headset and handset will disconnect and HBS-750 will vibrate to alert.
* If vibrate is set to off by pressing VOLUME UP button for 3 seconds, HBS-750
will not vibrate.
- If the headset and handset do not automatically reconnect when they are back
within the required range, briefly press the CALL button on the HBS-750 to
reconnect manually.
* It is possible to use these functions only when your handset supports them. For
further information about using these features, please consult your handset's
user manual.
- While in multi-connection and streaming, the inactive paired device, which is
out of range, will be disconnected. The HBS-750 will alert once with no attempt
to reconnect.
Calling
Answering a call / Ending a call
- When there is an incoming call, the headset will ring and vibrate.
* If vibrate is set to off by pressing VOLUME UP button for 3 seconds, HBS-750
will not vibrate.
- Briefly press the VOLUME DOWN button to stop vibration.
- Briefly press the CALL button.
Transferring a call
- While on a call on your handset, press and hold VOLUME UP button for 3
seconds to transfer the audio either from headset to handset or from handset
to headset.
6