HP 3PAR StoreServ 8000 Installationshandbuch Seite 132

10. Geben Sie im Menü StoreServ Configs 4 für Remove a StoreServ ein, und drücken Sie dann
die EINGABETASTE.
3
1 1. Geben Sie x ein, um zum vorherigen Menü zurückzukehren.
12. Geben Sie im Menü SP Main 1 für SP Control/Status ein, und drücken Sie die EINGABETASTE.
1 SP Main HP 3PAR Service Processor Menu Transfer media: ethernet Transfer status:
Ok Enter Control-C at any time to abort this process 1 ==> SP Control/Status 2
==> Network Configuration 3 ==> StoreServ Configuration Management 4 ==> StoreServ
Product Maintenance 5 ==> Local Notification Configuration 6 ==> Site
Authentication Key Manipulation 7 ==> Interactive CLI for a StoreServ X Exit
13. Geben Sie im Menü SP Control 3 ein, um Halt SP auszuwählen, und drücken Sie die
EINGABETASTE.
1 SP CONTROL HP 3PAR Service Processor Menu Transfer media: ethernet Transfer
status: Ok SP Control Functions Enter Control-C at any time to abort this process
1 ==> Display SP Version 2 ==> Reboot SP 3 ==> Halt SP 4 ==> Stop StoreServ
related Processes 5 ==> Start StoreServ related Processes 6 ==> File Transfer
Monitor 7 ==> SP File Transfer Trigger 8 ==> Reset Quiesce state in Transfer
process 9 ==> Mount a CDROM 10 ==> Unmount a CDROM 11 ==> SP Date/Time/Geographical
Location maintenance 12 ==> Manage NTP configuration 13 ==> Display SP status
14 ==> SP User Access Control 15 ==> SP Process Control Parameters 16 ==> Maintain
SP Software 17 ==> SP File Maintenance 18 ==> RESERVED 19 ==> Request a SPLOR
20 ==> Request an MSPLOR 21 ==> Run SPCheckhealth 22 ==> SP Certificate Information
X Return to previous menu
14. Geben Sie Y ein, um zu bestätigen, dass Sie den SP anhalten und ausschalten möchten.
1.3.1 SP SHUTDOWN HP 3PAR Service Processor Menu Transfer media: ethernet Transfer
status: Ok Confirmation Enter Control-C at any time to abort this process Halt
will power off the SP! Are you certain you want to halt the SP now? (y or n)
132 Systemdeinstallation
4 ==> StoreServ Product Maintenance
5 ==> Local Notification Configuration
6 ==> Site Authentication Key Manipulation
7 ==> Interactive CLI for an StoreServ
X Exit
StoreServ Configs
3PAR Service Processor Menu
Transfer media: ethernet
SP - StoreServ Configuration Manipulation
Enter Control-C at any time to abort this process
1 ==> Display StoreServ information
2 ==> Add a new StoreServ
3 ==> Modify an StoreServ config parameters
4 ==> Remove an StoreServ
X Return to the previous menu
Transfer status: Ok