REV Ritter EMT707CTLA Bedienungsanleitung Seite 7

Button Function
MENU Display of the different features in the following sequence:
cost, tariff, KWH, W,VA, V, A, Hz and power factor.
SET Set tariff and KWH.
In setting-mode: Change of digits

+
In setting-mode: Increase the setting value
RST Reset. cost, tariff and KWH will not be deleted.
FUNCTION
The energy measuring device measures the voltage, the power consump-
tion and the power-on time and calculates the electric work in KWH out
of it. If the energy cost are entered, also the cost are calculated and
displayed. The energy cost are calculated as follows: voltage (V) x current
(A) x price/KWH x time in hours (h).
By pressing the button „MENU" the different functions can be displayed in
the following sequence:
1. Cost: Shows the total cost of the consumed power.
Maximum value: 9999.99
2. Tariff: Shows the preset tariff. Maximum value: 99.99
3. KWH: Shows the KWH. Maximum value: 9999.99
4. W: Shows the actual consumed power in W
5. VA: Shows the actual consumed power in VA
6. V: Shows the actual voltage
7. A: Shows the actual amperage
8. Hz: Shows the actual Hertz value
9. PF: Shows the actual power factor (W/VA)
ASSEMBLY PLACE
This product is for the use in dry rooms.
It must not be exposed to wetness, rain or spray-water. Not for outdoor
use.
GB
7