Indications For Use; Important Parts - DeVillbiss PULSEDOSE COMPACT Bedienungsanleitung

INDICATIONS FOR USE

The DeVilbiss Compact Conserving Device is intended as a delivery device for medical-grade oxygen from
high-pressure oxygen cylinders. This is an ambulatory device, which allows patients to ambulate longer than
they would with a continuous flow regulator on the same cylinder.

IMPORTANT PARTS

9
6
5
2
3
Knob– This knob is used to attach the conserving device to the cylinder. (Model PD1000I only)
1.
PulseDose Indicator– Either green or red light illuminates each time the unit pulses oxygen.
2.
Normal Battery Indicator– A flashing green light indicates that there is sufficient battery power.
Low Battery Indicator– A flashing red light indicates that there are 4 - 8 hours of battery life remaining.
3.
The low battery indication time may be reduced when using NiMH batteries.
Change Battery Indicator– A constant red light indicates that the batteries should be changed
immediately. Unit can be used only in continuous flow mode until new batteries are installed.
Cannula Fitting– Use this fitting to attach the cannula to your PulseDose conserving device.
4.
5. Rotary Selector– When this rotary switch is set to "OFF," the unit is not using battery power and will not
pulse. When this switch is set to one of the numbers, the unit is on and awaiting inspiration through the
nasal cannula at which time it will dose on every breath. The volume of the oxygen delivered varies
according to which prescription flow setting is chosen. The final setting on the rotary switch is "CF"; this
EN - 4
Typical PD1000 (series) Front and Rear Product Labeling
1
8a
4
7
8B German DIN
SE-1000