When Working On Batteries Remember That; When Working On High Voltage Equipment - Tecnotest 5880 Bedienungsanleitung

________________________________________________________________________ SMART CHARGER
•
Do not touch the high voltage wire when the engine is running.
•
Handle portable lights carefully and only use them if their metal guards are in
place.
•
Wear safety glasses to protect your eyes from petrol, dust or metal chips.
•
Don't forget that the catalytic converter reaches very high temperatures that can
cause serious burns or start fires.
•
Make sure that there are no oil stains, rags, paper or other easily inflammable
material near the catalytic converter.

When working on batteries remember that:

Charge the battery only in airy rooms.
ATTENTION:
Batteries contain sulphuric acid and produce explosive gases; be
careful to what follows:
Connect the red cable to the battery positive and the black one
to the battery negative.
Always wear safety glasses.
Do not place tools on the battery. They could cause accidental
contacts.
Before testing or recharging a battery, cover the openings
with a wet cloth to suffocate any explosive gas.
Avoid making sparks when attaching the cables to the battery.
Do not splash the electrolyte on your skin, in your eyes or on
your clothes as it is extremely corrosive and highly toxic.
•
As to battery maintenance follow the Manufacturer instructions.
•
Make sure to have the correct liquid level in the battery.
•
Never recharge non rechargeable batteries.

When working on high voltage equipment:

•
Check to be certain the machine is grounded.
•
Disconnect the power source before connecting or disconnecting wires.
•
Do not touch parts with your hands wet.
•
Make sure you are grounded.
OPERATING INSTRUCTIONS

29