Installation - Zanussi ZEI3921 Benutzerinformation

If there is a fault, first try to find a solution to
the problem yourself. If you cannot find a solu-
tion to the problem yourself, speak your dealer
or the local Service Force Centre.
If you operated the appliance incorrectly,
or the installation was not carried out by a
A
MOD.
PROD.NO.
SER.NO
DATA
MODEL
A) Stick it on Guarantee Card and send this
part (if applicable)
B) Stick it on Guarantee Card and keep this
part (if applicable)
C) Stick it on instruction booklet
These data are necessary to help you
quickly and correctly. These data are
available on the supplied rating plate.
• Model description .................

Installation

Installation
Warning! Read and follow the
instructions carefully. There is a risk of
injury or damage to the appliance.
• Make sure that there is no damage to the
appliance from the transportation. Do not
connect a damaged appliance. Speak to the
supplier if necessary.
• Install built-in appliances only after you as-
semble the appliance into correct built-in
units and work surfaces. Make sure that
20
B
MOD.
PROD.NO.
SER.NO
03 IT
DATA
MADE IN ITALY
MODEL
registered engineer, the visit from the custom-
er service technician or dealer may not take
place free of charge, even during the warranty
period.
Labels supplied with the accessories bag
Stick the adhesive labels as indicated below:
C
MOD.
PROD.NO.
0049 SER.NO.
• Product number (PNC) .................
• Serial Number (S.N.) .................
Use the original spare parts only. They are
available at Service Force Centre and ap-
proved spare parts shops.
built-in units and surfaces obey the stand-
ards.
• Obey all orders and standards in force in
the country where you use the appliance
(safety standards, recycling standards, elec-
trical safety standards etc.)
Warning! Risk of injury from electrical
current.
• The electrical mains terminal is live.
• Make electrical mains terminal free of volt-
age.
TYPE
230V-50Hz
IP20
www.zanussi.com