Herunterladen Inhalt Inhalt Diese Seite drucken

TermaTech TT10 Montage- Und Bedienungsanleitung Seite 17

Vorschau ausblenden Andere Handbücher für TT10:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 9
UK
User and mounting manual
Please read also:
SUPPLEMENTARY INSTALLATION INSTRUCTIONS FOR THE UK MARKET (last 6 pages)
CE approved according to:
DS/EN13240
DS (Danish Standard), DIN (Deutsche Industrienorm),
HETAS
Congratulations on your new wood-burning stove.
We thank you for choosing a TermaTech wood-burning stove and wish you many cosy and warm
moments in the future.
Before using the stove you should read the user and mounting manual and also the SUPPLEMEN-
TARY INSTALLATION INSTRUCTIONS FOR THE UK MARKET (last 6 pages of this manual) so you are
familiar with the legal requirements as well as the instructions regarding maintenance. By this it is
ensured that the product works as it is intended and you get the most out of your investment for
many years to come.
Installation/user instruction..................................
Lighting instruction................................................
Maintenance...........................................................
Warranty/right to invoke lack of conformity..........
Hints......................................................................
Remedy of malfunctions / FAQ...............................
Technical specifications..........................................
Supplementary Inst. Instructions UK.....................
INSTALLATION INSTRUCTION
The stove is intended for "intermittent combustion". It is not meant to "heat over" at night. By fol-
lowing the instruction below in "Lighting instruction" the best and most environmentally friendly
combustion is achieved.
The wood-burning stove is delivered "ready for mounting" (the exhaust branch may need to be
screwed on) and must be connected to the chimney with a smoke pipe. The connection between
stove and chimney must, as far as possible, be mounted in one straight piece (with as few bends as
possible) and as minimum horizontally, but preferably rising from the stove to the chimney. Joints
must be tight. Remember that is has to be possible to clean the pipe (possibly with a cleaning hatch
on the pipe).
Any unauthorised changes to the wood-burning stove will be viewed as a structural change and
thereby the warranty will be void and is also a risk to safety.
In the door on your TT stove there is a spring that makes the door close by itself when you let go
of the handle.
This closing device is not a demand in the UK, Denmark and many other countries and can there-
fore be removed. In the bottom hinge the split with lentil head is removed which removes the ten-
sion from the spring. This is most easily done by using a small screw driver and side-cutting pliers.
National and European norms
The regulations in force at the time in question, including those that refer to national and European
standards, must be respected when installing the wood-burning stove. Contact your local dealer for
further advice and guidance in connection with mounting. Notify your Hetas installer before you use
your wood-burning stove. It must be ensured that there is sufficient airflow for the combustion in
the stove, so care must be taken concerning closely shut windows and doors that may hinder the
flow of air to the combustion.
Safety references
The surface of the stove as well as knobs, handle, window, smoke pipe, etc. become very hot when
the stove is in use. Touching these parts without necessary protection (glove or other protective
material) can lead to burns.
Remember to make children aware of this danger and make sure to keep them away from the
wood-burning stove when it is in use. For this purpose TermaTech offers various grates for the pro-
Page
17
Page
19
Page
20
Page
20
Page
21
Page
22
Page
23
Page
23
17

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Tt10sTt10hsTt10g

Inhaltsverzeichnis