Quax INDIGO Bauanleitung Seite 40

INDIGO
Quax
First dreams
®
First steps
Step 3 : Use the parts of step 5.1 and 5.2, one side EB2 of step 4.4 and four wood screws G
Push the sides (EB2) and the longeron (EB4) with their wooden dowels into the drillings and on the connectors
of the end panels (AB4). Push the wood screws (G) in the holes of the side and tighten them in the end panels.
Tighten the eccentrics in the longeron.
Step 4 : Use the parts of step 4.2 and 5.3, four wood screws H and four bottom supports I
Place the superstructure in front of the drillings on the chassis. Push the wood screws (H) into these drillings and
tighten in the superstructure. Push the bottom supports (I) in the lowest drillings on the end sides (EB1).
40
54 01 47xx
Omvormbaar bed 120x60 cm
Konvertierbar Bett 120x60 cm
Lit convertible 120x60 cm
Convertible bed 120x60 cm