Quax INDIGO Bauanleitung Seite 39

INDIGO
54 01 47xx
5. Assembling the bench
Needed parts : the leg frame from step 4.2, both end panels EB1 (now left and right), one side EB2, one
longeron EB4 and the slatted bottom EB3
Step 1 : Use both end panels EB1 and two connectors K
Tighten a connector (K) in the provided hole at the inner bottom of the end side (EB1). Repeat with the
other end side. Now you have a left (AB4 LH) and a right end side (AB4 RH).
Step 2 : Use the longeron EB4, two wooden dowels F and four eccentrics E
Push two eccentrics (L) in the provided holes at the innerside of the longeron (EB4). Push two wooden
dowels (F) in the provided holes at the ends of the longeron.
Omvormbaar bed 120x60 cm
Konvertierbar Bett 120x60 cm
Lit convertible 120x60 cm
Convertible bed 120x60 cm
Quax
First dreams
®
First steps
39